Analog Input Objects
Showing objects from
Object
 Object Name
 Object Description
Out of
Service
Present Value
Reliability
Status
 Units
1
 Line Voltage
 Line AB reading from WattNode
N
88.00000
64
0,1,0,0
 volts
2
 Line Current
 Line A reading from WattNode
N
0.00
64
0,1,0,0
 amperes
3
 Line Frequency
 Reading from WattNode
N
0.00
64
0,1,0,0
 hertz
4
 Power
 Power A reading from WattNode
N
0.00
64
0,1,0,0
 watts
5
 Analog Input 5
 
N
88.00000
67
0,1,0,0
 no_units
6
 Analog Input 6
 
N
0.00
67
0,1,0,0
 no_units
7
 Analog Input 7
 
N
0.00
67
0,1,0,0
 no_units
8
 Analog Input 8
 
N
0.00
67
0,1,0,0
 no_units
9
 Analog Input 9
 
N
0.00
0
0,0,0,0
 no_units
 Analog Input 10
 
N
0.00
0
0,0,0,0
 no_units
 Analog Input 11
 
N
0.00
0
0,0,0,0
 no_units
 Analog Input 12
 
N
0.00
0
0,0,0,0
 no_units
 Analog Input 13
 
N
0.00
0
0,0,0,0
 no_units
 Analog Input 14
 
N
0.00
0
0,0,0,0
 no_units
 Analog Input 15
 
N
0.00
0
0,0,0,0
 no_units
Quick Help

The object name, units, value, and status are shown for a list of objects starting with the number entered at the top of the page. Click Prev/Next to scroll through the list. Click on the object number in the first column to change name, units, COV, and out-of-service state.

The source of data for an Analog Input object will typically be reading from some other BACnet or Modbus device. Click on the object number in the first column for more detail including the link to any client map providing data to this object.

Out of Service means polling for data will stop. While out of service, the present value may be written by the BACnet client. Data may be forced via this web page at any time, but will be overwritten by the next mapped client update unless the object is out of service.

Reliability codes may be any of the following:
Modbus client/master, no response from slave (64)
Modbus client/master, crc error (65)
Modbus exception, illegal function code (66)
Modbus exception, illegal data address (67)
Modbus exception, illegal data value (68)
Modbus exception, code+65, rarely used (69..79)
Local device, configuration property fault (80)
Faulty Modbus packet(81)
BACnet client, device timeout (82)
BACnet client, error returned by server (83)

Status flags A,B,C,D indicate the following, 0 meaning not true, 1 meaning true:
A = in alarm
B = fault
C = overridden
D = out of service