 |
| ||||||||
| ||||||||
| ||||||||
| Quick Help
The object name, units, value, and status are shown for a list of objects starting with the number entered at the top of the page. Click Prev/Next to scroll through the list. Click on the object number in the first column to change name, units, COV, and out-of-service state. The destination of data for an Analog Output object will typically be some other BACnet device. Click on the object number in the first column for more detail including the link to any client map receiving data from this object. The Analog Output object is commandable, meaning the BACnet client must write both a value and a priority level for that value. The highest level value will be the one written to the remote device (if mapped). If all values are relinquished, the relinquish default value will be written to the remote device. Out of service means the mapped remote device will not be written to. Values written by the BACnet client will be retained, but only applied when this object is placed back in service. At that time, the highest priority value will be written to the remote device. Reliability codes may be any of the following: Status flags A,B,C,D indicate the following, 0 meaning not true, 1 meaning true: | ||||||||
