Rule number simply tells you where you're at on the list of the local SNMP Agent's OID maps. Click "next" and "prev" to scroll through the list. To advance directly to a specific map, enter the desired number in the "Showing" box, then click Update.

This page enables SNMP Get/Set to registers indicated on the above map list. The available local OID's are assigned automatically. You may select which local registers are mapped to these OID's.

This device uses RFC 6340 encoding of floating point data in its MIB. There is no universal support for transmission of floating point data via SNMP. If your SNMP client/manager does not support RFC 6340, then you should use either scaled integer or character string representation of floating point data (refer to Integer or Char String branches of this MIB).

For each local register to be accessed by the remote SNMP Client, enter the local register number. The local data and register name will be shown for reference. The data returned to the remote SNMP client will be the indicated local value. Enter a register number, then click Update to add the mapping to the list.

Registers are not immediately available when entered in the list above. When you have finished making changes, click the Reload SNMP button to clear and reload the MIB. The MIB is also automatically reloaded every time you restart this device.

You can auto-fill the MIB by providing a count, starting index, and starting local register, and then click Auto-Fill. This is a shortcut for assigning many MIB variables at once.

Check Confirm and click Clear to clear the content of this entire MIB branch.

To remove a variable from the MIB, enter the map number at the bottom of the screen and click Remove. The remaining variables will be moved up the list. To insert a new variable into the MIB, enter the position at which you wish to insert, and click Insert Before. To simply add a variable at the end of the list, click Next and enter the new variable.